Holiday snaps 4

Corfe castle, ex-royal residence, slighted during the civil war... and reached by STEAM TRAIN. I think the gleeful reaction of the heir and the spare reinforced my opinion that this is pretty much the perfect boys day out. Brilliant!

Holiday snaps 3

More neolithic marvels today - this time, Avebury ring. Apart from the undeniable impressiveness of the size of the stones, and the no-tech of those who built the henge and erected the stones, I was amazed at how much of the village is within the circle... and an A road goes right across it. I couldn't help thinking this might make a great scenario setting for Gareth the Grot's witchfinder escapades: what foul things, real or imagined, might creep across from faeire to torment and beguile the locals foolish enough to believe they could stamp out the old ways with a fancy new house and grazing their sheep in between the stones?

Holiday snaps 2

On to Winchester, and the majestic Round Table made during the reign of Edward I. Of course, I like to believe that it really is the table around which sat those paragons of chivalry: Percival, Gawain, Bedivere, Lancelot, Bors, Gaheris, Galahad, Kay, Arthur himself...

Holiday snaps 1

We're on a week's jaunt to the edge of the New Forest, and stopped off under lowering skies for a quick circuit of this beauty:

As Life Members of English Heritage (gold card, don'cha know!?) we often stop for a brisk shufti at wonderful things, knowing that the limited attention span of our three year old isn't going to waste our entry fee... and we can pop in next time we're passing :)

My five year old spent the next quarter of an hour in the car thinking up multiple ways of making a scale model of the henge. Good lad.

Gladiator arena (54mm) - WIP 2

First blood in the arena! The populace and the manes will be well pleased!

Ok, so I slipped with a stanley knife and tried to take my index finger off at the first knuckle. One of those really neat cuts that doesn't bleed to begin with, you carry on thinking you've had a lucky escape, and then realise you're dripping claret onto your workpiece. What a clumsy lanista I am!

At least the plastic I was cutting was red, and none went onto the carpet...

I've also removed the unwanted entrance from another section, leaving me with two entrances and two sections needing filling. Hopefully I'll get a bit more done before we go on holiday.

I hope you're enjoying the summer so far,
Rab

Gladiator arena (54mm) - WIP 1

Aaaaaaaand made it - summer holidays!!!

With great thoughtfulness, Mrs Rab took the Rablings away last night so that my first evening and morning after a crushingly long and busy term was utterly my own. I was going to start on this last night but had a couple of ales more than usual while having a very pleasant chat in my local with a good colleague and his wife - any geeking would have been a total bodge job. So this morning, with a slightly muzzy head, I got out my Stuff to put together a suitable arena for my newly arrived and very lovely (and accurate, hurrah!) Alpha Forge gladiators. They're BIG - 54mm, and by far the largest figures I've attempted. I'm hoping to get results at least a fraction as good as these fabulous examples from Carmen's Painty Fun Time:

It's because of this picture, and the others on his blog that I went for the Alpha Forge figures - lovely!

I'm still waiting on a pack of lipped bases of a suitable size to drop through my letterbox, so the arena comes first.

That chap I was drinking with? I made this on his machine. 52mm hexes with a 2mm gap between them.

After sealing the whole board with watered down pva to stop the mdf drinking all the paint, I treated each hex like a miniature's base and covered it in pva...

... then sand

Once dry, I painted the whole thing apart from where the stands will go in a mix of a "sand" craft paint and a "velvet truffle 3" tester pot from Homebase

A heavy drybrush of Foundry Base Sand (10A)

The Rablings arrived back at this stage and helped (no, really - little boys are great at random drybrushing for terrain!) with further highlights. Mini-Rab #1 even neatened up around the outermost hexes.

... then wotked up through the 10B and 10C shades, topped off with that "sand" craft paint which is almost white, and the lines between each hex redone with the background colour

Finally, a mock up of the whole thing. The stands will be painted and the box will be replaced with a scratchbuilt Editor's box. I'll also seal off the entrances of the two outermost stands and make portcullis-style gates for the other two.

And now it is late, so good night and happy geeking,
Rab

Plastic pieces of potential

Evenin' all.

Some of you may have seen my thread over on LAF asking for opinions on the Marx arena for 54mm plastic gladiators and suchlike - it was part of  a larger Ben Hur related play set from quite a few years back. The whole set is likely to set you back at least £60, and will almost certainly have received more than a spot of heavy play from small children if the current ebay auctions are anything to go by...

Anyway, I found it an eight eighths set (i.e. enough for a full circle) on clearance for £12 from Plasticsoldiers.co.uk and it arrived today!

The plastic is fairly typical for children's toys - fairly flexible, so I'll need to fix it to a board before even thinking of making finishing touches.

Maybe now is as good a time as any to show you the box-file thing I've started and you can see in the top left of the photo above. We ended up with a bag of box files and I thought there had to be some geeky use for them, other than pure storage. My shoddy, wonky light-box effort got squashed when we moved house, so this is its replacement.

First step, assemble the tools - box file, cutting and sticking stuff, and some thick card.

 

Next, cut the card to the same width as the lid and base, respectively, firmly taping them alongside to give "wings". I've already cut some of a standard paper-backed grass mat to fit the lid and its wings in the picture below. Oh, i should also mention I removed the catch on the lid and the flappy bit that holds the papers you'd normally find in such a box in place.

Wings flapping

Box wings folded

Lid wings folded

The whole thingamajig closed up. Neat, eh?

I haven't got the back image sorted yet. I'm after a fairly soft-focus, impressionistic countryside image which will serve for my chivalric project.

Anyway, back to the gladiators' arena. Each piece comes with a gate way which can take a portcullis. As I only want a half oval to serve as a backdrop for my games (opinion seems pretty strong that a full arena is a pain to lean into to move figures around in), I'll be able to practise with impunity - I plan to cut back two of the gates from the four sections I will use to leave them plain. They also don't quite stand square so will need pinning together in some way:

You can see where the background image will sit quite nicely in this shot. 28mm Foundry peasant for scale.

Peasant again, in the ruins of a Roman arena. See what I mean about the stands not being square?

The stands are also open backed which means they can "stack", but I'll seal them over to give greater rigidity and for aesthetics.

Conga line coliseum!

All in all, I'm pleased with my purchases but it will be a bit more of a project to get them to gaming-table standard than I hoped. With luck, I'll only need four of them and then I'll be looking to offload the others.

Phew, it's hot here and that was a long post for me, image-wise!

Stay in the shade, drink plenty (you choose the beverage!), and happy geeking,

Rab

Welcome to my underground lair

In between cursing my internet connection for not coping with streaming the first Ashes test (a win, hurrah, but they do need to sort the third umpire stuff out), I cleared out our cellar. Now, we've only been in since the start of April and the first thing I did when we moved in was to lay some laminate flooring over the newly installed waterproof floor treatment... and then promptly filled it with boxes, a sawhorse and tins of paint. Upstairs is now officially done so it was time to tackle the pit. My reward was to claim a corner for my geeking :)

Um, it's our cellar, but part of it is ALL MINE!!!!

Look - paints, partly painted miniatures, and not one but TWO lamps. The old coal shute that the window 'looks out' into will be getting a transparent lid at some point soon giving me more natural light - these photos were taken at about 11pm

Polystyrene packaging repurposed as a display shelf

My new lovely buildings from pmc games - don't fret, the staining on the wall is residue from the damproofing, not imminent destruction of my books and stuff from water coming in. I hope.

When I was clearing up I found we've ended up with loads of boxfiles, so I was inspired to make something - a backdrop thing for taking photos of miniatures and scenery from a box file, some card and an offcut from a GW grass mat.

Stay tuned, fellow geekers,

Rab

British Museum - gladiators

I took a school trip to the British Museum today for a very successful and enjoyable visit to the Life and Death in Pompeii and Herculaneum exhibition. I was a little surprised to find that one group had obviously found this blog (via an older brother's friend who I've gamed with in the past) and referred to their small group as "Team Goblinquest".  

Anyway, quite apart from the glories of a fallen civilisation and the various other wonders of the Museum, there were some great gladiator pieces in the general Roman collection.

Murmillo's helmet - look at the detachable grille as well as the catch holding the two halves together

Description label of the helm above. Golden sheen and feathers, eh? Snazzy!

A detachable visor... detached

Solid bronze shield for a hoplomachus

thraex versus hoplomachus - note that the hoplomachus has lost his spear and is closing in with a pugio

Gladiator decorations! Notice the thraex begging for mission by dropping his shield and raising his index finger.

SW19

Turns out that it is NOT all; huzzah, huzzah, huzzah :)

Well played, Mr Murray!